RoofCal

Roof Area Calculator

Roof square footage, squares, shingle bundles, and sheathing sheets from your footprint and pitch — overhang and waste included.

Footprint & Pitch
ft
ft
in

The calculator adds the overhang to both sides of each footprint dimension before applying the pitch multiplier, then adds your waste factor to bundles and sheets.

Order Summary
×1.118 multiplier @ 6:12
Plan area (with overhang)1,134 sq ft (42′ × 27′)
Pitch multiplier (1 ÷ cos θ)×1.118
Underlayment (10-SQ synthetic rolls)2 rolls

How the Roof Area Calculation Works

The formula: roof area = plan area × pitch multiplier. The multiplier is 1 ÷ cos(pitch angle) — the same √(1 + (rise/12)²) factor used for rafter lengths, because the roof plane is the hypotenuse over the horizontal footprint. A 6:12 roof has a multiplier of 1.118, so it carries about 12% more shingles than its footprint suggests.

Hip vs gable: for the same footprint and pitch, hip and gable roofs have nearly identical surface area — the hips replace rectangle ends with triangles at equal pitch. Differences only become material on irregular footprints; for L-shaped or winged plans, split the footprint into rectangles, calculate each, and add them together.

Ordering rule of thumb: round squares up, keep the waste factor (10% for simple gables, 15% for hips, valleys, and dormers), and return unopened bundles — most suppliers accept them. Bundles and sheets above already include your selected waste.

Frequently Asked Questions

Multiply the footprint length by width (adding overhangs), then multiply by the pitch multiplier — 1 ÷ cos(pitch angle), the same factor used for rafter lengths. A 40 × 25 ft footprint with a 6:12 pitch (multiplier 1.118) is about 1,118 sq ft of roof surface.