RoofCal

Hip Rafter Calculator

Hip rafter length and pitch (rise:17), valley rafters, and a jack rafter cutting schedule — for equal-pitch hip roofs and additions.

Plain gable commons: common rafter calculator
Common Run & Pitch
ft
Half the building span on a regular hip roof — see the common rafter calculator for the full run math.
Geometry used: hip run = common run × √2 · hip pitch = same rise over 17 (12√2) · hip factor = √(1 + (rise/17)²) · ridge shortening = (thickness ÷ 2 × √2) ÷ cos(hip θ) · jack difference = spacing × common factor.
Hip Corner Cut List
6:12 → 6:17 · 19.4°
17' 10 7/8"
Hip Rafter (plumb-to-plumb)
− 1.12" ridge deduction
16' 11 5/8"
Hip Run (45° in plan)
run × √2 · factor ×1.06
17.89"
Jack Common Difference
per jack @ 16" o.c.
17' 11"
Valley (equal-pitch 45°)
same math — use the wing's run
Longest theoretical hip (corner to ridge centerline): 17' 11". Hips and valleys are typically backed or dropped so the sheathing planes meet — cut a test pair first.
Jack Rafter Cutting Schedule (16" o.c.)
Jack #Plan RunCut LengthNote
Jack 110' 8"11' 11"−17.89" vs previous
Jack 29' 4"10' 5 1/8"−17.89" vs previous
Jack 38' 0"8' 11 1/4"−17.89" vs previous
Jack 46' 8"7' 5 3/8"−17.89" vs previous
Jack 55' 4"5' 11 1/2"−17.89" vs previous
Jack 64' 0"4' 5 5/8"−17.89" vs previous
Jack 72' 8"2' 11 7/8"−17.89" vs previous
Jack 81' 4"1' 5"−17.89" vs previous
Jack rafters run in the common direction and die into the hip (or valley) at 45°. Each successive jack shortens by 17.89" (16" × common factor). Pairs of jacks face each other across every hip and valley — count corners and wings before cutting.

Frequently Asked Questions

Hip rafters run at 45° in plan from the wall corner to the ridge, so their horizontal run is √2 (about 1.414) times the common run for the same rise. That makes the hip's pitch shallower — expressed as rise over 17 inches of run instead of rise over 12 (a 6:12 common roof has a 6:17 hip).